I1600 Compatible Printers | Wide-Format, Flatbed & UV DTF Printer Head Replacement Guide
Brand XBH
Product origin CHINA
The I1600 is a drop-in replacement for compatible wide-format, flatbed, and UV DTF printer models. Verify your carriage mounting, ribbon pinout, and board firmware before ordering. Send us your printer brand and model — we confirm variant compatibility (A1/E1/U1) and ink system match before shipment.
Q: My printer uses a generic I3200 carriage — can I upgrade to I1600? A: Mechanical footprint is similar but not guaranteed drop-in. Carriage mounting dimensions, ribbon connector pinout, and board communication protocol must all match. Some boards support both head models, others are locked to one. Send us your printer brand and model so we can check carriage and firmware compatibility before you order.
Q: Does the I1600 work with any RIP software? A: The RIP communicates with the printer's main board, not directly with the head. If your board recognizes and configures the head correctly, your existing RIP works without modification. No special RIP license or upgrade is required for the head itself — the RIP doesn't know or care which head is installed.
Q: What if my printer originally shipped with a TX800 head — is I1600 a direct swap? A: No. TX800 and I1600 have different carriage designs, connector pinouts, and droplet geometries. They are not interchangeable. Do not attempt to fit an I1600 into a TX800 carriage — the mechanical and electrical interfaces are fundamentally different. You'll damage both the head and the carriage.
Q: How do I confirm my machine is I1600-ready before buying? A: Send us your printer brand and exact model number. We check carriage specifications, board compatibility, and which ink variant (A1/E1/U1) your system requires. This prevents ordering the wrong head and avoids return shipping and downtime while you wait for the correct replacement.
Q: Are there printer models where I1600 is factory-standard? A: Yes — many Chinese-made wide-format printers, flatbed printers, and UV DTF machines ship with I1600 as the stock head. If your machine was built around this head model, replacement is straightforward. We see I1600 used across solvent, aqueous, and UV printer platforms from multiple manufacturers.
Q: Can I mix I1600 and another head model on the same carriage? A: No. Carriage boards and firing circuits are configured for one head type per machine. Mixing head models on one machine is not supported — the board can't switch between different communication protocols. Stick with the head model your machine was designed for.
Q: Should I replace the damper at the same time as the head? A: Inspect the damper during the swap. If it shows sediment buildup, discoloration, or clogging, replace it — a dirty damper pushes debris into the new head and shortens its service life. A clean damper in good condition can be reused. Don't assume it's fine; look at it before you reinstall.
