Regular maintenance of the printer
Lifetime maintenance:
In the process of using the inkjet printer, it will produce unclear printing or no printing, etc., especially the situation was more obvious when printing was first started. If daily maintenance is done well, it will make thisThe situation has improved a lot.
The inkjet printer uses cleaning agent to clean the surface of the nozzle every time it just starts printing.Scrape the nozzle sheet with a hard object, use a brush, and use the cleaning function to clean the nozzle to ensure the sprayAfter the holes are open, start printing.
During use, when there is dust covering the nozzle, clean the nozzle with a cleaning agent, and use the cleaning function to clean the nozzle.
When the photoelectric switch is covered with dust, clean the photoelectric switch with dry cloth or alcohol.
After replacing the ink, check whether the ink supply system is leaking.
Maintenance: The daily maintenance of the inkjet printer can increase the service life of the inkjet printer and reduce the failure rate.
Regular maintenance mainly includes :
Clean the dust on the surface of the sprayer once a month.
Clean up the dust on the internal circuit board of the printer once a month to prevent the electronic components from being burnt due to poor heat dissipation.
Clean the dust on the filter on the air pump once a month to prevent insufficient air pressure caused by insufficient air intake.
Clean the interior and pipeline of the nozzle with cleaning agent once a month (using the cleaning function).
The nozzle does not need to be used for more than three days, clean the inside of the nozzle with a cleaning agent, and take it back for storage.
Regularly check whether all cables and ink supply systems of the printer are damaged. If so, replace them in time.
Check whether the ink viscosity is normal. The ink of the inkjet printer is very important. The viscosity of the ink has a great influence on the normal use of the inkjet printer.
Check whether the ink has expired. As a strict chemical, the ink also has an expiration date. If the ink expires, it should be purchased as soon as possible. Otherwise, the print quality cannot be guaranteed.
Regularly check the connection of the power supply and the ground wire.
Each time you turn on the machine, clean the nozzle first to test the printing effect. (No need to clean the nozzle after a short time shutdown)