How to maintain the dx11 printhead can prolong the service life
Maintenance of the dx11 printhead
The print head is one of the important parts of the inkjet printer, and it is also one of the most delicate parts. The use of the print head focuses on maintenance and maintenance. The quality of maintenance and maintenance directly determines the use effect and service life of the print head. How to make your Equipment brings greater profits. This is something everyone is considering. Obviously, prolonging the service life of the nozzle is one of the means to reduce the cost. Now the methods to prolong the service life of the nozzle are listed as follows
1. Indoor environment
If the working environment of the equipment is not very good, the dust can easily enter the ink cartridge and then the sub ink cartridge, and then enter the print head, which will affect the printing effect of the print head and shorten the service life of the print head.
2.operate
The nozzle part on the surface of the nozzle cannot rub against any objects, and the fine hairs are easy to hang on the nozzle surface. Cause plugging and ink dripping, thus affecting the printing effect. Therefore, it is also very important to strictly require the operation of the equipment.
3.Auxiliary accessories
Every accessory on the machine has its purpose, do not dismantle it at will. Like the main and secondary ink cartridges. filter etc.
4.ink
The quality of the ink directly affects the quality of the picture and the print head. It is best to use the ink recommended by the equipment manufacturer, because these inks have undergone strict and long-term testing, and have certain guarantees for the equipment and the print head. Do not arbitrarily add any substances to the ink
maintainance
Before the printer is shut down and powered off, the nozzle must be cleaned and placed on the nozzle cover with a moisturizing sponge pad, which can ensure the condition and digital quality of the nozzle, and prolong the service life of the nozzle to a certain extent.
Second, the use of nozzles
1. The socket plug of the nozzle cannot be touched by hand to prevent oxidation.
2. During installation, the nozzle socket must be aligned and cannot be hard inserted. If the pinhole is inserted badly, the nozzle will not work properly.
3. The nozzle socket cannot enter ink, cleaning liquid, etc. The contaminated socket can be cleaned with alcohol
4. The print head must maintain a good heat dissipation environment when using it, otherwise the print head circuit will be easily damaged
5. The electrostatic damage to the circuit part of the nozzle is very serious. When operating the nozzle or touching the nozzle board, the operator must insist on eliminating the electrostatic factor.
6. If the print head is powered off during the coding process, the coding must be suspended to clean the print head. If the print head is seriously blocked, the print head can be cleaned with a solvent, and then the ink is printed out.
7. After coding, put the protective cover on the nozzle. keep it that way